Technical Data - Olympia A 235 Plus Instrucciones De Uso

The lamination result is not as good
as expected - the laminated foil is
not completely transparent or is
wavy, or the laminated material is
damaged.

Technical Data

Laminating system:
Laminating temperature
Laminating width (max.)
Lamination thickness (max.)
Warm-up phase
Foil thickness
Laminating speed:
Automatic switch-off
in case of overheating
Indicator lamps
Cool down phase
Rollers
Power supply
Power consumption
Dimensions
Weight
Suitable materials
(hot lamination)
Suitable materials
(cold lamination)
Use only laminating foils that meet the
requirements in the "Technical Data".
Do not exceed the maximum thickness of
the laminated material and foil.
Laminate the same foil again to improve
the lamination result.
Make sure you do not hot-laminate heat-
sensitive material.
If you use thicker laminating foils
(100 μ or 125 μm), allow the laminator to
warm up longer.
Hot-roller
COLD: Room temperature: max. 35 °C
HOT: 97 - 105 °C
230 mm
0.5 mm
3 - 4 minutes
80 - 125 micron
300 mm/min.
Yes
2, Ready and Power
approx. 30 min.
4
220 - 240 V, 50 Hz, 1.15 A
265 W
380 x 160 x 36 mm
Approx. 1175 g
Non-heat sensitive material up to a total thick­
ness of 0.5 mm
Heat sensitive material up to a total thickness
of 0.5 mm
Laminator A 235 Plus
Technical Data
21