Cable Management; Plug In The Ac Power Cord - Sylvania LD427SSX Manual Del Usuario

P
REPARATION
Supplied accessories used in this connection are as follows:
• cable management tie x 1
• AC power cord x 1
[USB Flash Memory]
This unit offers easy playback JPEG pictures and MP3
musics. Insert the USB flash memory to the USB terminal shown
as below. For more details, refer to "JPEG/MP3 Playback"
on page 34.
Note:
• The USB flash memory is not supplied with this unit.
• Do not use an extension cord between the USB flash
memory and the unit. Always insert the USB flash memory
to this unit directly.
• We do not guarantee the all USB flash memory can be
supported on this unit.
• Be sure to keep a backup copy of the original files on your
device before you play them back on this unit.
We have no responsibilities for damage or loss of your
stored data.
• When you ready to remove a USB flash memory, at first turn
off the unit to avoid any damage for your data and the unit.
• If the USB flash memory left behind in the USB terminal and
you turn off the unit, the "USB"(main menu) will appear
automatically when you turn on the unit again.
 Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.
AC outlet
Caution:
• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.
14
EN
 Cable Management
Attach the supplied cable management tie first into the
holes on the lower side of the rear of this unit shown
as below. Keep the cables through this holder to avoid
tangle them.
side of this unit
AC power cord
rear of this unit
rear of this unit