Gima 32924 Manual Del Usuario página 41

41
Recommended separation distances between portable and mobile RF
communication equipment and the device.
The device is intended for use in an electromagnetic environment where radiated RF
disturbances are under control. User can help prevent electromagnetic interference by
keeping the device at a minimum distance from portable and mobile RF communications
equipment (transmitters). Below table details the maximum output power of transmitter:
Rated maximum
output power
of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable
to the frequency of the transmitter, where P is the maximum output power rating
of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
Separation distance according
to frequency of transmitter (m)
150 kHz to 80 MHz
d = 1.2
0,12
0,38
1,2
3,8
12
ENGLISH
80 MHz to 800 MHz
d = 1.2
0,12
0,38
1,2
3,8
12
800 MHz to 2.5 GHz
d = 2.3
0,23
0,73
2,3
7,3
23