Introduction; Equipment General Specifications - Guarany Super 2S Manual Del Operador

1. INTRODUCTION

Thank you for choosing our Super 2S Pre-Pressurized Sprayer: one of the most modern pieces of equipment for controlling endemic disease vectors, which also complies with
the World Health Organization (WHO) specifications.
This piece of equipment combines the traditional qualities of other Guarany products by incorporating its innovative design and operation.
For best results, read this manual containing the technical specifications, and instructions for correct use and storage.
We are sure that this equipment will surprise you with the variety of its applications, and will soon become one of your best investments in terms of cost benefit through its
work capacity.
For any necessary questions or doubts, please contact our export department by e-mail, [email protected] or by calling +55 (11) 2118-8400, as well as our
network of authorized Guarany distributors, which can be found on our website www.guaranyind.com.br.

2. EQUIPMENT GENERAL SPECIFICATIONS

No need for continuous pumping during spraying, thus providing greater freedom of movement for the operator.
Multipurpose piston pump handle: for relieving or
pressurizing the pump cylinder, which facilitates
both transportation of the equipment and pressurizing
the tank.
Universal type spray tip body containing a stainless
steel uniform flat fan nozzle (E8002) and a Constant
Flow Valve - CFV that maintains a constant working
pressure of 145 kPa (21 psi), thus ensuring a more
uniform application.
Stainless steel discharge assembly set with trigger
safety lock to prevent accidental operating of the
spray when you are not using the equipment.
Pump fitted at side without the need for removal when
recharging. Solvent resistant retention valve.
High performance with less effort.
Tank lid with positive locking system
(recommended for all pressurized containers)
which increases the efficiency of the seal.
Safety valve with automatic air release in
case of excess pressure or for manual control.
Stainless steel tank tested to 827 kPa (120 psi)
with wide filler mouth to facilitate the filling,
emptying and cleaning.
23