Removal From Storage - Lifan 160F Manual Para El Usuario

II. STORAGE
EN
If the engine is not kept in use for a long time, be sure to
store it properly. Make sure the storage area is dry and free
of dust.
1. Replace engine oil (Fig. 32).
2. Disconnect the spark plug. Fill a spoon of fresh engine oil
from the sprak plug mount hole into the cylinder. Rotate the
engine to distribute engine oil evenly, followed by fi tting
the sprak plug to original position.
3. Pull the starting rope slowly until feel a slight anti-action,
and then keep pulling so as to align the arrow of the
starting sleeve with the hole of the starter. At this
time, both the inlet and outlet valves are closed so to
help prevent the engine inside from rusting (Fig. 33).
4. Cover the engine so keep dust away.
III. REMOVAL FROM STORAGE
Before reusing, service the engine in accordance with
the instructions of the table.
Storage time
Within one month
One - two months
Two months - one year
Above one year
1 Screw off the drain plug and drain out fuel in the carburetor.
2
Turn off the engine switch fi rst, disconnect the deposit cup and empty it.
Note: For the sake of environmental protection, we recommend to fi ll the discarded fuel into a
closed container and bring to local recycling station.
Never pour freely.
WARNING
Fuel is extremely fl ammable and explosive under certain conditions. Keep cigarette,
open fl ames and sparks away from operating site.
36
Drain
plug
Service item
Drain out original fuel of the fuel tank and refuel.
Drain out original fuel of the fuel tank and refuel;
Drain out fuel in the carburetor
Empty the deposit cup 2
Drain out original fuel of the fuel tank and refuel;
Empty the fuel cup in the carburetor
Empty the deposit cup 2
Move the engine from the storage place, fi ll it with fuel,
then start up it.
Deposit
fi g. 32
Align the arrow
of the starting
sleeve with the
hole in the starter
fi g. 33
1
;
.
1 ;
;
cup