Viewing Test Results; Setting The Alarm Function; Setting The Time Alarms (Alarm 1-5) - i-SENS VetMate Manual De Usuario

Viewing Test Results

Step 1
Press the ▲ or S button to turn the meter on.
The current date and time will be displayed
on the bottom of the screen for 2 seconds. A
14-day average value for your dog assigned to
'no 1' will be followed.
Step 2
Use the ▼ button to scroll
through the test results,
starting from the most
recent and ending with the
oldest. Press the ▲ button
to return to the result seen
previously. The test results
will be displayed with the
dates and time following
selected numbers
(no 1–no 4). After checking
the stored test results, press
the S button to turn off the
meter.
36 www.i-sens.com
▼button
▲button
▼button
▲button

Setting the Alarm Function

Five time-set alarms (alarm 1–5) can be set in the VetMate meter:
Setting the Time Alarms (Alarm 1–5)
Step 1
Without inserting a test strip, press the ▲
and S buttons simultaneously for 3 seconds
to enter time alarm mode. 'alarm 1' will be
displayed while 'OFF' blinks on the screen.
Step 2
On pressing the ▼ button, 'alarm 1' is set and
'On' is displayed on the screen. Press the ▼
button again to cancel 'alarm 1' and 'OFF' will
blink on the screen.
Step 3
Press the ▲ button to adjust the time of
'alarm 1' .
A number representing the time will blink
on the screen. Press the ▼ button to set
the time.
www.i-sens.com 37