Telescopic Handle; Transportation And Storage - Ryobi RY18LMX40A-0 Traducción De Las Instrucciones Originales

The battery pack has overheat protection.
Excessive temperatures will cause the battery
to stop powering the product. If the battery
pack is too warm, allow it to cool down before
resuming operation. If the product still does
not work, recharge the battery.
NOTE: The battery pack LED indicator will
not work if the battery protection feature has caused the battery pack to stop powering
the product. Turn off the product or remove
the battery pack from the product and the
battery pack LED indicator will resume normal
function.
The product can be used with one battery
in port 1 only, or for added run time, with
batteries in ports 1 and 2.

TELESCOPIC HANDLE

The product is equipped with a telescopic
handle that can be adjusted for storage and
operation. The telescopic handle must be fully
extended when setting up the product for use.
NOTE: The product will not function if the
telescopic handle is not fully extended and
the two latches are not in the correct position.
ON/OFF LEVER
A
Press the start button and then squeeze
the on/off lever (A or B) to start the product.
Release the start button and keep squeezing
the on/off lever to run the blade. Release the
on/off lever to stop the blade.
GENERAL MOWING TIPS
The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawnmower to
suit the current condition of the lawn.
For best performance, always cut off one-
■
third or less of the total height of the grass.
When cutting long grass, reduce walking
■
4 | English
speed to allow for more effective cutting
and a proper discharge of the clippings.
Do not cut wet grass; it will stick to the
■
underside of the deck and prevent proper
collection or discharge of grass clippings.
New or thick grass may require a higher
■
cutting height.
To collect the grass cuttings for disposal,
■
remove the mulching plug and fit the
grass catcher, making sure that the
grass discharge chute cover is properly
closed. Empty the grass catcher regularly;
otherwise, the discharge chute will become
blocked with grass cuttings.
If you are making a light cut and wish
■
for the grass cuttings to remain on the
lawn, fit the mulching plug, and close the
grass discharge chute cover to cover the
discharge opening. It is not necessary to fit
the grass catcher in this case.
The product is designed to operate and cut
■
most effectively when moving forwards.
A higher cutting height extends the run
■
time of the battery.

TRANSPORTATION AND STORAGE

Turn off the product, and remove the
■
isolator key and the battery pack. Make
sure that all moving parts have come to a
B
complete stop. Allow the product to cool
down before storing or transporting.
Clean all foreign materials from the product.
■
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep the product away from
corrosive agents such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
For transportation in vehicles, remove
■
the isolator key, and secure the product
against movement or falling to prevent
injury to persons or damage to the product.
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp; keep all body parts away from the
blade while it is exposed.
WARNING