Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PC 3100
4. Tare
When weighing, place the item in the center of the platform, press "TARE" to reset the LCD to "0.0"
or save the tare weight (when tare weight is at 4% capacity, but it will not save the tare weight when
tare weight is at 4% capacity. If the scale is stable, the LCD will show "0.0g".Then continue to put the
items to weigh, but the added weight plus the tare weight can not exceed the over load weight.
5. Weighing
When the LCD shows "0.0g",it means it is ok to weigh. Place the item in the center of the scale
platform ,the LCD will show the current weight. If the LCD shows a stable weight, a hint will come
from the buzzer, the figure will show on the LCD that is the accurate weight of the item.
6. Locking weight
When the LCD shows "0.00g" then press "HOLD"，and hold for 3 seconds the LCD will flash to show
the icon of "HOLD", then place the item in the center of platform ,if the weight remains stable, the
LCD will lock the figure of weight for 30s and icon "HOLD" will flash for a long time.
If the weight differs, the icon "HOLD" will flash again ,but the LCD keep the original weight. Then
press "HOLD" to lock the new weight or exit the lock procedure. If the weight is 0.00g, it will exit the
lock procedure or it will lock in the new weight.
Overload
7
.
When the weight is exceed 102% capacity, the LCD will show "Err. If the scale is overloaded for 3s,
the scale will be auto power off. If the weight is reduced to the range of capacity in 3s, the scale can
continue to be used .
8. Low battery indicator
If there is a sign of a battery flashing in the left corner of the LCD, it means the power is
low, but the scale can still function.
If the LCD shows
"Lo" and then auto power off, please change the
batteries
10
Tabla de contenido
