Dremel 6700 Instrucciones De Funcionamiento Y Seguridad página 9

DM 1619PA7491_06-14_6700 6/26/14 11:46 AM Page 9
Disconnect the plug from the power source before making any assembly,
W RNING
adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool.
Mounting the motor unit
To mount the motor unit, fasten it to a
wooden structure with four(4) wood screws
or two(2) clamps (Fig. 2).
Installing and Removing Guides
(see figure 3)
Your Sharpening Tool comes with several
interchangeable guides.
1. To install a guide(A), with Sharpener
unplugged, firmly grasp the guide(A).
2. Align guide mounting flange(B) with
mounting slots(C).
3. Firmly slide guide(A) onto motor unit(D)
until you hear a "click".
4. To remove a guide(A), unplug Sharpener.
5. Push downward on mounting latch(E).
6. Pull up on guide(A).
Assembly
B
FIG. 3
C
9
FIG. 2
D
A
E