Rothenberger ROTHERM 2000 Instrucciones De Uso página 6

Maintenance
The set is basically maintenance-free. The set should be disconnected from the mains before any repairs are
performed. Burned-out flat or stick electrodes should be replaced in good time. Replace the holders if
necessary.
Troubleshooting
The red "Input Voltage" control LED does not light up.
- no input voltage
- defective mains cable
- the red control LED is defective
- the fuse in the main unit is defective.
The green control LED does not light up.
- the pneumatic circuit has not been activated
- the air intake to the pneumatic circuit has been inter rupted
- a vacuum has developed in the air in-take
- the overload protection has switched off the unit temporarily.
Accessories
The relevant accessories and an order form can be found from Page 40 onwards.
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose registered
and certi.ed recycling companies are available. For an environmentalfriendly disposal of the non-recyclable
parts (e.g. electronic waste) please contact your local waste disposal authority.
ENGLISH
4