Information On Water Resistance - Crosscall CORE-T4 Manual De Instrucciones

• This device is not intended for use by people (including children) with reduced physical,
sensory or mental capacities, or whose lack of experience or knowledge prevents
them from safely using the device, if they are not supervised or have not been given
instructions beforehand by the person responsible for their safety.
• Keep small tablet accessories out of reach of children in order to avoid choking.
• Do not let your children or pets chew or lick the device.
• Do not modify or recondition your tablet.
• Do not expose your tablet to flames, explosions, or other sources of danger.
• Please switch off your tablet when you are near explosive materials or liquids.
• The tablet must only be connected to a USB 2.0 interface.
• The ideal operating temperature is between 0°C and 40°C. The ideal temperature for
storage is between 20°C and 50°C.
• Stop using your device if any of its parts are cracked, broken, or if it overheats.
• Do not press your device against your eyes, ears or any other part of your body, and do
not put it in your mouth.
• Do not use the flash near the eyes of people or animals.
• Only use the original accessories for this tablet and do not install its battery in another
tablet.

INFORMATION ON WATER RESISTANCE

• You have just bought an IP68 compliant tablet. In order to guarantee optimal use and
water resistance, ensure that all the flaps and plugs on the openings and the cover are
correctly sealed.
• Do not open the caps and SIM drawer of the device if it is in the water or in a very humid
environment.
• Make sure that the caps are not damaged when you open or close them. Make sure that
the seal is free from any debris, such as sand or dust, to avoid damaging the device.
• The flaps covering the openings may come loose in the event of a fall or impact.
• Make sure that all the covers are properly aligned and completely closed.
• If the device has been submerged in water or the microphone or loud speaker is wet,
the sound may not be clear during a call. It is recommended to wait a few minutes
after the immersion of your device to recover its initial audio quality. Make sure that the
microphone or loud speaker is clean and dry by wiping it with a dry cloth.
61