Operating The Blower; After Finishing Work; Transporting; Transporting The Blower - Stihl BGA 85 Manual De Instrucciones

Ocultar thumbs Ver también para BGA 85:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59

12 After Finishing Work

11.2 Operating the Blower

► Point the nozzle at the ground.
► Move forward slowly, in a controlled manner.
12 After Finishing Work
12.1 After Finishing Work
► Switch off blower, move retaining latch to the 
and remove battery.
► If the blower is wet: allow blower to dry.
► Clean blower.
► Clean battery.

13 Transporting

13.1 Transporting the Blower

► Switch off the blower, push retaining latch to position
and remove the battery.
► Carry the blower by the control handle.
► Transporting the blower in a vehicle: Secure the blower to
prevent turnover and movement.
0458-286-9921-A

13.2 Transporting the Battery

► Switch off blower, move retaining latch to the 
and remove battery.
► Check that the battery is in a safe condition.
► Pack the battery in such a way that the following
conditions are fulfilled:
– The packaging is electrically non-conductive.
– The battery cannot move inside the packaging.
► Secure the packaging so that it cannot move.
The battery is subject to the Carriage of Dangerous Goods
regulations. The battery is classed as UN 3480 (lithium ion
batteries) and has been tested in accordance with the UN
Manual of Tests and Criteria Part III, Subsection 38.3 .
The transport regulations can be found in www.stihl.com/
safety-data-sheets.

14 Storing

14.1 Storing the Blower

position
► Switch off blower, move retaining latch to the 
and remove battery.
► The blower should be stored in such a way that the
following conditions are fulfilled:
– The blower is out of the reach of children.
– The blower is clean and dry.

14.2 Storing the Battery

STIHL recommends that you store the battery with a charge
between 40% and 60% (2 LEDs glow green).
► Observe the following points when storing the battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed space.
– Battery is stored separately, away from the blower and
charger.
– Battery is in non-conductive packaging.
English
position
position
33
Tabla de contenido
loading

Tabla de contenido