Testing The Blower And Battery; Checking The Controls; Testing The Battery; Operating The Blower - Stihl BGA 56 Manual De Instrucciones

10 Testing the Blower and Battery

► If air continues to flow from nozzle: Remove the battery
and contact your STIHL servicing dealer.
Blower has a malfunction.
10 Testing the Blower and Battery

10.1 Checking the Controls

Trigger
► Remove the battery.
► Pull the trigger.
► If the trigger is stiff or does not spring back to its idle
position: Do not use the blower and contact your STIHL
servicing dealer.
The trigger has a malfunction.
Switching On
► Fit the battery.
► Pull the trigger and hold it there.
Air flows from the nozzle.
► If 3 LEDs flash red: Remove the battery and contact your
STIHL servicing dealer.
Malfunction in blower.
► Release the trigger.
No air flows from the nozzle.
► If air continues to flow from nozzle: Remove the battery
and contact your STIHL servicing dealer.
Blower has a malfunction.

10.2 Testing the Battery

► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
0458-712-9821-C

11 Operating the Blower

11.1 Holding and Controlling the Blower

► Hold and control the blower with one hand on the control
handle - wrap your thumb around the handle.

11.2 Blow-Sweeping

► Point the nozzle at the ground.
► Walk slowly and steadily forwards.
English
41