Using The Remote Control; Appliance Description - essentiel b ECHSC1b Instrucciones De Uso

Oscillating (80° left and 80° right)
•
IP21 protection: for bathroom volume 3 (see diagram on page 27)
•
Thermal safety: if the appliance overheats (e.g. if a piece of clothing covers the appliance),
•
it automatically stops working. Remove the obstruction before restarting it.
Anti-tilt safety device: this appliance is equipped with a safety cut-out system, which
•
automatically switches off the appliance if it is tilted.

appliance description

7
6
"I/0" On/Off switch
1.
Rear air inlet grille
2.
Carrying handle with remote control storage compartment
3.
Base
4.
AC power cord
5.
Front air outlet grille
6.
Display screen and control panel
7.
Remote control
8.
30
V.2.0
your product
8
5
4

using the remote control

Installing the battery in the remote control
Press the tab to remove the battery compartment on the back of the remote control
1.
Insert a 3V CR2032 battery, matching the indicated polarity (+/-).
2.
3
2
Push the battery compartment back into the remote control.
3.
Use only the type of battery specified in this manual.
•
1
Replace the battery when it is worn out or in the event of a leak.
•
If you do not use the appliance for a while, remove the battery from the remote control.
•
Using the remote control
Point the remote control at the infrared sensor on the display screen so that the screen can
•
receive the information transmitted.
Make sure there are no obstacles between the remote control and the infrared sensor.
•
Tilt the remote control at an angle of approximately 30° to the display screen.
•
2) Pull to remove the
battery compartment
1) Press the tab
"+" end on top
CR2032 battery
V.2.0
using the remote control
31