Installing The Appliance; Using The Remote Control - essentiel b ECHS 2000VH Instrucciones De Uso

installing the appliance

1. Install the appliance on a flat and stable surface.
2. For optimum operational convenience, you can position the appliance vertically (control
panel facing upwards) or horizontally (control panel facing left). In the event of a horizontal
installation, make sure the air intake and exhaust grilles are completely clear.
Vertical position
use
Inserting the batteries into the remote control
1. Remove the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA batteries, matching the polarity (+/-).
3. Close the cover.
If you do not use the appliance for a while, remove the batteries from the
remote control. Do not use old batteries with new batteries or different types of
batteries together.
18
V.3.0
use
Horizontal position

USING THE REMOTE CONTROL

Point the remote control at the top of the front panel so that the infrared receiver can receive
•
the information transmitted.
Make sure there are no obstacles between the remote control and the fan.
•
Connection and standby
Plug the appliance into an easily accessible wall socket, then set the power switch (0/I) on
•
the back of the appliance to "I" (on).
A beep sounds and the appliance automatically goes into standby mode.
•
Switching the appliance on/off
1. Press the button on the control panel or remote control to switch on the appliance. By
default, the appliance starts in "High intensity" mode at a temperature of 35°C.
2. Press this button again to put the appliance on standby.
Selecting the heating mode
When the appliance is switched on, press the
control repeatedly until you reach the heating mode of your choice:
High intensity: the appliance runs on full power and the
and symbols are displayed on screen. The intensity bar
is fully lit. The selected temperature is shown on screen.
Medium intensity: the appliance runs on medium power
and the
intensity bar is half lit. The selected temperature is shown on
screen.
Ventilation: the appliance does not heat and ventilates
ambient air. The
are displayed on screen.
button on the control panel or remote
and symbols are displayed on screen. The
symbol and the selected temperature
V.3.0
19
use