Warnings And Alarms - GE AF-600 FP Guía Rápida

Warnings and Alarms

7 Warnings and Alarms
7.1 Warning and Alarm Definitions
Table 7.1 defines whether a warning is issued prior to an alarm, and whether the alarm trips the unit or trip locks the unit.
No. Description
1 10 Volts low
2 Live zero error
4 Mains phase loss
5 DC link voltage high
6 DC link voltage low
7 DC over voltage
7 7
8 DC under voltage
9 Inverter overloaded
10 Motor over temperature
11 Motor thermistor over temperature
12 Torque limit
13 Over Current
14 Earth fault
15 Hardware mismatch
16 Short Circuit
17 Control word timeout
18 Start Failed
23 Internal Fan Fault
24 External Fan Fault
29 Drive over temperature
30 Motor phase U missing
31 Motor phase V missing
32 Motor phase W missing
33 Inrush fault
34 Fieldbus communication fault
35 Option Fault
36 Mains failure
38 Internal fault
39 Heatsink sensor
40 Overload of Digital Output Terminal 27
41 Overload of Digital Output Terminal 29
42 Overload of Digital Output On X30/6
42 Overload of Digital Output On X30/7
45 45 Earth Fault 2
46 Pwr. card supply
30
AF-600 FP Quick Guide
Warning Alarm/Trip
X
(X) (X)
(X) (X)
X
X
X X
X X
X X
(X) (X)
(X) (X)
X X
X X
X X
X
X
(X) (X)
X
X
X X
(X) (X)
(X) (X)
(X) (X)
X
X X
X X
X X
X
X
(X)
(X)
(X)
(X)
X
DET-759A
Alarm/Trip Lock Parameter Reference
AN-01 Live Zero Timeout
Function
(X) SP-12 Function at Line
Imbalance
F-10 Electronic Overload
F-10 Electronic Overload
X
X
X
X
O-04 Control Word
Timeout Function
SP-53 Fan Monitor
X
(X) H-78 Missing Motor Phase
Function
(X) H-78 Missing Motor Phase
Function
(X) H-78 Missing Motor Phase
Function
X
X
X
E-00 Digital I/O Mode,
E-51 Terminal 27 Mode
E-00 Digital I/O Mode,
E-52 Terminal 29 Mode
E-56 Term X30/6 Digi Out
(OPCGPIO)
E-57 Term X30/7 Digi Out
(OPCGPIO)
X