Using The Appliance; Pause Operation; End Of Operation; Cleaning - Profi Cook PC-FR 1177 H Manual De Instrucciones

Using the Appliance

1. Connect the appliance to a properly installed earthed
socket.
NOTE:
You will hear a beep sound and all symbols light up
briefly. The button lights red.
2. Press the
button to switch the appliance on. You will
see the pre-adjustment 190 °C and 3 minutes.
3. Select an auto function by using the
time (1 - 60 minutes) and the temperature (80 °C - 200 °C)
individually by using the buttons
NOTE:
You may use program P for preheating.
4. Press the button to start the cooking process.
NOTE:
• Once the pre-set temperature is reached, the
symbol will light green.
• The symbol is switching between the colours red
and green. This is normal and it indicates that the
temperature is controlled by the thermostat and is
being maintained.
5. Using the handle, pull the fat tank with the basket from
the appliance.
6. Fill the basket with the desired food.
7. Slide the fat tank with the basket back into the appli-
ance. It must engage.
8. If necessary, shake the food after half the cooking time.
Pull it out of the fat tank with the basket on the handle.
WARNING:
• Hot steam can escape!
• Never shake the basket when it is in the fat tank,
because this may contain hot oil.
WARNING:
• Always turn the appliance off before cleaning it and remove the
mains plug. Wait until the appliance has cooled down.
• Do not immerse the appliance in water! Doing so may result in
an electric shock or fire.
44
PC-FR1177H_IM
9. Place the fat tank with basket on a heat-resistant
surface.
10. Slide the cover of the release button towards the basket.
11. Press the release button to remove the basket. Shake
the contents of the basket.
12. Put the basket back in the fat tank. This must engage.
13. Slide the fat tank back into the appliance.

Pause Operation

• Press the
button or set the
ton is flashing. Press the
operation. The
and .
• The operation will also be paused as soon as you re-
move the basket. In order to turn the appliance back on,
insert the basket again.
• The appliance will start from the spot it has been
• If, however, you pull out the power plug, your current

End of Operation

1. After the time has elapsed, the appliance will auto-
matically switch into standby mode. After approx.
20 seconds, you will hear 5 beep sounds and the
symbol goes off.
2. Pull out the fat tank with the basket by the handle.
3. Place the fat tank with basket on a heat-resistant
surface.
4. Slide the cover of the release button towards the basket.
5. Press the release button to remove the basket. Put the
food in a heatproof bowl.
6. Slide the fat tank back into the appliance.

Cleaning

button to pause the operation. The
button again to resume the
button is continuously lit again.
NOTE:
paused.
settings will be lost. When inserting the power plug
and pressing the button the appliance will show the
pre-adjustment again.
but-
12.12.18