Internal Wiring - Fermax CITYLINE DUOX Serie Manual De Instalador Y Usuario

DUO DUO DUOX CITYLINE KIT 1-2L DUO DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUOX CITYLINE KIT 1-2L DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L

INTERNAL WIRING

1
The Kit Panels do not require a call extension module.
EN
DUOX Amplifier Call:
•
2 simultaneous conversation channels on the same pair.
•
The house terminal´s address is encoded with 6 digits (calling code). The default
value is 000000, (this can´t be called from any entry panel).
•
Panels with an address «0» in each block allow for communication with telephones
when disconnected if the communication line is free. Communication is established
with the «0» panel of the block corresponding to the telephone. If you do not want
this feature do not assign this address to any panels.
•
A telephone with the address 000000 can not establish communication upon
disconnecting.
•
If there are panels in the sub-block, no connection is made upon disconnection, only
with panel 0 of the block.
•
A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence number + bell. You do not need to
enter the 6 digits. If a shorter code is entered, it is filled in with «0» to the left. The
letter «A» can be used to delete the sequence entered.
CN9
SW1
SW1 PROG
CN9 TAMPER
CN2
2 1
DUOX AMPLIFICADOR
CN1
AMPLIFIER
A
B
C
CN1 PACK EXTENSION
D
E
F
DL2
DL2 LED
IDIOMA
LANGUAGE
ONE
EXIT
TO
BUS
ONE
CN3 P2 B B C NO NC BS
+12
+
-
CP
NC
NO
AUDIO
18Vdc
- +
S
GND P1
VERSION
:
C
Pag 11