Faber FBH 64 BK Manual Del Usuario página 9

After electrical connection
Switch on all the hotplates for about 3 minutes
X Z
to check the proper function.
Power limitation settings
Power limitation setting is possible for all the
following models:
FBH 64 BK, FCH 63 GR, FBH 84 BK,
FCH 84 GR, FBH 83 BK, FCH 83 GR.
– Setting is possible only during the first two
minutes after plug in the appliance.
– The touch has to be unlocked and all heaters
have to be switched off.
– The factory power setting is the maximum level.
– If there is a black out, power level set remains
unchanged.
Example of power limitation setting of a four cooking
zones hob (FBH 64 BK / FBH 84 BK / FCH 84 GR):
Press at the same time all the four cooking
X Z
zones and hold it until you can hear a signal.
If you can't hear the signal within 10 seconds,
X Z
repeat the operation trying to better position the
fingers.
You can now switch with
X Z
between the power limitation levels
(2,8 kW, 3,5 kW and MAX).
2
8
8 8
8 8
and
8
8
7
8
Note: If, after setting the power level, you don't
proceed to confirm with the finger touch and the
subsequent signal within 60 seconds, the new
setting will not be acquired by the hob.
Example of power limitation setting of a three
cooking zones hob
(FCH 63 GR / FBH 83 BK / FCH 83 GR):
Press at the same time all the three cooking
X Z
zones and hold it until you can hear a signal.
If you can't hear the signal within 10 seconds,
X Z
repeat the operation trying to better position the
fingers.
You can now switch with
X Z
the power limitation levels
(2,8 kW, 3,5 kW and MAX).
2
8
7
8
4
8
8 8
8
8
and between
8
8
4
8
9