Complete Installation - Haier ESA415J Manual De Uso

Install outer case in window
1. Place outer case in window. Lower sash until it rests behind
front flange of top channel. Bottom channel must rest behind
window sill.
A B
A. Top channel
B. Window sash
C. Bottom channel
2. Expand both curtains to contact the window frame. Install
four wood screws 31/32". Two in each upper right and left of
the curtains.
3. Use three wood screws 31/32" to fix the case to windows
sash.
NOTE: To make screws easier to drive, drill a pilot hole into the
sash through clearance hole in curtains.
C
4. Install left & right installation bracket and as shown in fig.
Install bolt(2 1/2" long flat head bolt and locknut) to the
installation bracket and adjust them to proper length ,then use
6 (13/32")screws to fix the bracket on the case.
5. Use a wood block between the leveling bolts and the wall
if the wall is weak or if the weight of the air conditioner falls
between the studs in the wall.

Complete Installation

1. Insert the foam seal behind the top of the lower window sash
and against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
B
7