Battery Charging; Installation And Start-Up - Promax PRODIG-5 Manual Del Usuario

COLOUR
GREEN
YELLOW
RED
Table 2.- Indication of the battery charge level on screen.
3.1.2.1

Battery Charging

To fully charge the battery, connect the instrument to the external DC charger
without activating the power on process. The length of time it takes to recharge it
depends on the condition of the battery. If they are very low the recharging period is
about 5 hours. The CHARGER [4] indicator should remain lit.
When the battery charging process is completed with the instrument off, the fan
stops.
The instrument battery needs to be kept charged between 30% and 50% of its capacity
when not in use. The battery needs to be fully charged for best results. A fully charged
battery suffers temperature-related discharge. For example, at a room temperature of
°
20 C, it can lose up to 10% of its charge over 12 months.
3.2

Installation and Start-up

The PRODIG-5 (
Therefore does not require installation
When the rotary selector [1] is pressed for more than two seconds, the instrument
is started up in the automatic power-off mode; that is, the device is automatically
disconnected after the selected minutes if no key has been pressed. When the device is
operating, it is also possible to select the auto power-off mode by means of the
Preferences menu [22] and to select the time out until the automatic power-off.
Page 14
BATTERY CHARGE LEVEL INDICATORS
SYMBOL
level meter is designed for use as a portable device.
EXPLORER)
USER'S MANUAL. PRODIG-5
CHARGE LEVEL
75 % ∼ 100 %
30 % ∼ 75 %
10 % ∼ 30 %
< 10 %
Charge in progress.
IMPORTANT
11/2013