Description Of The Inputs And Outputs; Rf Input; Rs-232C Serial Port - Promax PRODIG-5 Manual Del Usuario

USER'S MANUAL. PRODIG-5

6 DESCRIPTION OF THE INPUTS AND OUTPUTS

6.1

RF input

The RF input is through the RF
signal level should never exceed 130 dBμV.
6.2

RS-232C serial port

The PRODIG-5
(EXPLORER)
with a PC through the Pktools or NetUpdate software and to perform diagnosis, setup
and calibration processes. The signals in this connector are described in Table 4.
Figure 42.- RS-232C connector. External view.
PIN No. SIGNAL
1 Carrier detect
2 Data Receive (RxD)
3 Data Transmit (TxD)
4 Data Terminal Ready (DTR)
5 Ground (GND)
6 Data Set Ready (DSR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
9 Ring Indicator
Table 4.- Description of the RS-232C connector.
11/2013
[30] connector on the side panel. The peak
incorporates an RS-232C serial port to communicate
5
4
3
2
1
9
8
7
6
CHARACTERISTICS
(not connected)
(not connected)
(not connected)
(not connected)
Page 67