Analogue Tv: Measuring The Video Carrier Level - Promax PRODIG-5 Manual Del Usuario

USER'S MANUAL. PRODIG-5
C/N
MER
CBER
VBER
Satellite band - Analogue channels
Level
C/N
Satellite band - Digital channels (DVB-S):
Channel Power
C/N
MER
CBER
VBER
In order to change the measurement mode press
will appear cyclically all the measures available for the tuned signal.

5.14.1 Analogue TV: Measuring the Video Carrier Level

In the measurement mode of analogue signals, the PRODIG-5 (
monitor can work as an analogue indicator of level representing the signal present in
the input.
11/2013
Out-channel measurement. Noise level is measured at f noise =
f tuning ± ½*Channel BW. To measure it correctly digital
channel must be tuned at its central frequency.
Modulation error ratio.
BER measurement (Bit error rate) for the digital signal before
error correction (BER before FEC).
BER measurement (Bit error rate) for the digital signal after
error correction (BER after Viterbi).
Level measurement of the currently tuned carrier.
Ratio between the modulated signal power and the equivalent
noise power for a same bandwidth.
Automatic method.
Ratio between the modulated signal power and the equivalent
noise power for a same bandwidth.
Modulation error ratio.
BER measurement (Bit error rate) for the digital signal before
error correction (BER before FEC).
BER measurement (Bit error rate) for the digital signal after
error correction (BER after Viterbi).
[12] key. On the monitor
EXPLORER
Page 45
),