Promax PRODIG-5 Manual Del Usuario página 118

READY TO START
Figure 13.- Datalogger screen for Attenuation test frequencies.
Once the START option is selected the instrument will capture all test values
corresponding to the three pilot frequencies in the active band. When measuring is
completed, it will offer the options to store data or to start a new acquisition.
NOTE: In order to select the function (Attenuation test or IF SAT test) might be
necessary to switch the frequency band between Terrestrial or Satellite by
means of the front panel
Page 36
TEST POINT:
CHANNEL SET:
FREQ: 48.30 MHz
- - - kHz
CH:
START
FINISHED
TEST POINT:
CHANNEL SET:
FREQ: 48.30 MHz
- - - - kHz
CH: PILOT_01
START SAVE
Figure 14.- End of data acquisition.
DATALOGGER_01
POINT_01
ATTENUATION TEST
REF: - - -
LEVEL: - - -
EXIT
DATALOGGER_01
POINT_01
ATTENUATION TEST
REF: 90.6
LEVEL: 86.3
EXIT
key [10].
USER'S MANUAL. PRODIG-5
dBuV
dBuV
dBuV
dBuV
11/2013