Specifications - Hitachi CB 18DBL Manual De Instrucciones

English
2 Battery Charger (UC18YFSL)
Battery and battery charger are not included with this product.

SPECIFICATIONS

1. Cordless Band Saw
Model
Voltage
Type of motor
Band Saw Blade dimensions
No-Load Band Saw blade
speed
Max. cutting capacity
Overall length
Weight (with BSL1850)
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Electronic control
○ Soft-start
○ Overload protection
This protection feature cuts off the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
12
Cord
Pilot lamp
Nameplate
Fig. 3
Standard Mode (1 – 5)
Auto Mode (A)
Round pipe
Square pipe
Guide rail
Fan-cooled DC brushless motor
35 – 3/8" × 1/2" × 0.020" (900 × 12.5 × 0.5 mm)
260 – 640 SFPM (80 – 195 m/min)
395 SFPM (120 m/min)
3 – 1/4" (83 mm)
3 – 1/8" × 3 – 1/8" (80 mm × 80 mm)
16 – 1/4" (413 mm)
7.7 lbs. (3.5 kg)
○ Overheat protection
This protection feature cuts off the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in
a few minutes.
After that you can use it again.
CB18DBL
18 V