Bartscher GE 25 Manual De Usario página 37

Preserving

The device can also be used for preserving foodstuffs in jars.

Use the enclosed grid for putting the jars in the container. The grate helps a better
circulation of the boiling water under and between the jars and at the same time a
quicker heating of them.

After putting the jars in the cointainer pour so much water so that the jars are
immersed to approx. 3/4 of their height.

Connect the device to a suitable power socket.

Set the preserving temperature. Read the temperature and the preserving time in a
cookery book or in indications of a special recipe.
NOTE!
Pay attention to the fact that the heating time does not depend on the
preserving time. The preserving time starts when the green control light of
heating goes off for the first time.

After preserving, disconnect the device from the power socket (take out the plug!).

Take the jars out of the preserving pot. While doing that, use tongs for taking out jars
or a cloth so as to avoid burning your hand

Leave the water in the device to cool and then empty the pot.
CAUTION!
The device is equipped with protection against
overheating. If the device happens to be empty
when turned on, the overheating protection will be
activated. Remove the plug from its socket and leave
the device to cool for approx. 30 minutes. Let the
liquid drain.
Next, press the RESET button located at the bottom
of the device. The device is ready for use. In case
the device does not work properly afterwards,
contact you customer service.
- 33 -