Operation Of The Accessory For Liquid; Maintenance - cecotec CONGA 750 Manual De Instrucciones

ENGLISH

4. OPERATION OF THE ACCESSORY FOR LIQUID

1. Remove the mop from the bottom of the accessory, open the plug of the container, and fill it
with water. You can also add specific cleaning agents in adequate proportions.
2. Attach the mop again to the bottom of the accessory, use the Velcro to fix it.
3. Attach the accessory to the bottom of the vacuum cleaner. Insert the four plastic poles of the
accessory in the four holes you can find on the bottom of the appliance.
4. Turn on the vacuum cleaner robot. It will vacuum and scrub the floor at the same time.

5. MAINTENANCE

Unplug the product and turn off the power switch before carrying out cleaning and maintenance tasks.
Cleaning of the side brushes
Clean the side brushes once they get dirty. Replace the side brush with a new one once it gets
damaged.
TIP: the left and right side brushes are identical and do not belong to a specific side.
Cleaning of the dust tank and filter.
Clean the dust tank and filter once the product has finished working, as shown below:
· Check whether there are foreign particles in the suction channel and clean it after taking out the
dust tank.
· The EPA filter should be cleaned with the brush after use.
· The EPA filter should be washed with water after it has been used for 15-30 days.
· Dry the primary and EPA filters in a ventilated and shady place before using them again.
· The EPA and primary filters can be replaced.
18 CONGA 750
Container plug
*
Poles
Insertion holes