Practical Advice; Maintenance And Service; Maintenance And Cleaning - Würth H 26-MLS Instrucciones De Servicio

both hands to withstand the forces this may cre-
ate and adopt a position with stable footing.
Switch the power tool off immediately and re-

move the application tool if the power tool be-
comes blocked. Switching on when the drilling
tool is blocked may cause high torque reactions.

Practical Advice

Pull the plug out of the socket before carrying

out any work on the power tool.
Changing the chisel position
You can lock the chisel in 36 different positions, so you can
select the optimum working position for each task.
– Insert the chisel into the tool holder.
– Turn the impact/mode selector switch (12) to "set chisel
position".
– Turn the application tool to the required chisel position.
– Turn the impact/mode selector switch (12) to the "chis-
elling" position. With this, the tool holder is locked.
– Set the rotational direction for chiselling to clockwise.

Maintenance and Service

Maintenance and cleaning

Pull the plug out of the socket before carrying

out any work on the power tool.
 To ensure safe and efficient operation, always
keep the power tool and the ventilation slots
clean.
Replace a damaged dust protection cap immedi-

ately. It is recommended that you have use an
after-sales service for this.
Clean the tool holder (3) after each use.
If the machine should fail despite the care taken in manufactur-
ing and testing procedures, it should be sent to Würth Mas-
terservice for repair.
In all correspondence and spare parts orders, please always
include the article number given on the type plate of the
power tool.
The current spare parts list for this power tool can be found on-
line at http://www.wuerth.com/partsmanager or you can re-
quest a copy from your nearest Würth branch.
Warranty
This Würth power tool is supplied with a warranty in accord-
ance with the legal/country-specific provisions, valid from the
date of purchase (invoice or delivery note required as proof of
purchase). Damage is rectified by means of repair or replace-
ment delivery.
18
Damage attributable to natural wear and tear, overloading or
improper use is excluded from the warranty cover.
In the event of complaints, the fully assembled power tool must
be handed over to a Würth branch, your Würth sales repres-
entative or a Würth-authorised customer service point for
power tools.
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with house-
hold waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation into
national law, power tools that are no longer usable must be
collected separately and disposed of in an environmentally
friendly manner.