Optional Accessories - Makita 9561CR Manual De Instrucciones

MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the vents
start to become obstructed. (Fig. 21)
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Wheel guard (Wheel cover) For depressed center
wheel/Multi disc
• Wheel guard (Wheel cover) For abrasive cut-off wheel/
diamond wheel
• Depressed center wheels
• Abrasive cut-off wheels
• Multi discs
• Diamond wheels
• Wire cup brushes
• Wire bevel brush 85
• Abrasive discs
• Inner flange
• Lock nut For depressed center wheel/abrasive cut-off
wheel/multi disc/diamond wheel
• Lock nut For abrasive disc
• Lock nut wrench
• Side grip
• Rubber pad
• Dust cover attachment
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 9561CR/CVR, 9562CR/CVR, 9564CR/CVR
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 9565CR/CVR
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 9561CR/CVR, 9562CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 9564CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 9565CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
ENG905-1
): 83 dB (A)
pA
): 94 dB (A)
WA
): 82 dB (A)
pA
): 93 dB (A)
WA
ENG900-1
2
): 8.5 m/s
h,AG
2
2
): 7.5 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
2
): 8.0 m/s
h,AG
2
2
): 8.0 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
2
): 8.0 m/s
h,AG
2
2
): 7.5 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
ENG902-1
11