Ec Declaration Of Conformity - Dolmar PM-5101 S3C Manual De Instrucciones

PROBLEM
Engine idles poorly.
Engine skips at high
speed.
Engine overheats.
Mower vibrates
abnormally.
14. ENVIRONMENT
Should your machine need replacement after extended
use, do not put it in the domestic waste but dispose of it in
an environmentally safe way.

15. EC Declaration of Conformity

Makita declares that the following machine(s):
Designation of Machine: Petrol Lawn Mower
Model No./ Type: PM-5101 S3C
Specifications: See "4. TECHNICAL DATA"
Conforms to the following European Directives:
2004/108/EC, 2006/42/EC, 2000/14/EC & 2005/88/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN ISO 5395-1, EN ISO 5395-2, EN ISO14982
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV SÜD Industrie Service GmbH
Westendstrasse 199, D-80686 München,
Deutschland
Identification number: 0036
PM-5101 S3C
Measured Sound Power Level: 94.9 dB (A)
Guaranteed Sound Power Level: 98 dB (A)
22. 8. 2014
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
PROBABLE CAUSE
Air cleaner element is dirty.
Air slots in engine shroud are blocked. Remove debris from slots.
Cooling fins and air passages under
engine blower housing are blocked.
Gap between electrodes of spark plug
is too close.
Cooling air flow is restricted.
Incorrect spark plug.
Cutting assembly is loose.
Cutting assembly is unbalanced.
Director
CORRECTIVE ACTION
Clean air cleaner element: refer to ENGINE
OWNERS MANUAL.
Remove debris from cooling fins and air passages.
Set gap between electrodes at 0.7 to 0.8 mm.
Remover any debris from slots in shroud, blower
housing, air passages.
Install RJ19LMC spark plug and cooling fins on
engine.
Tighten blade.
Balance blade.
15