ANGLED ADAPTOR ACCESSORIES
ATTACHING LARGE BRUSH, ANGLED ADAPTOR, EXTENSION WANDS AND MICROFIBER MOP PAD
i
The angled adaptor is used to attach the Large Brush.
ALWAYS attach accessories before turning the unit on.
1
Angled
adaptor
Slide the angled adaptor into the
large brush receptacle. The adaptor
must be angled down.
MICROFIBER MOP PAD
Never remove the mop pad while the machine is in
operation or warm to the touch.
1
Lay microfiber mop pad on a flat
surface.
The large brush and mop pad are perfect for
use on these hard floor surfaces:
•
•
Stained Concrete
•
•
Linoleum
•
•
Marble
2
90º
Rotate the adaptor 90° to set into place.
Align the brush adaptor with the end
of the extension wand so that the oval
hole on the adaptor aligns with the lock/
release button on the wand.
2
Place the large brush over the mop
pad.
Granite
Attention
Ceramic Tile
Vinyl
Do not use on unsealed hard wood, laminate flooring or
unglazed ceramic surfaces.
Surfaces that are not properly sealed may be warped or
damaged by exposure to heat and moisture. Always test
a small area before beginning.
EN
3
Press down on the lock/release button.
While continuing to hold button down,
slide brush head adaptor onto extension
wand. Press firmly until button snaps into
hole.
3
Press down on a clip on the brush
and fold the end of the pad beneath
the clip. Release the clip to fasten
the pad into place. Repeat for the
opposite side.
9