Davey EcoSalt Serie Manual De Instalación Y De Mantenimiento página 6

CONNECTING THE ELECTROLYTIC CELL TO THE POWER SUPPLY:
The Power Supply is fitted with a flexible
lead terminated with connectors. These
must be correctly
connections on the underside of the
Cell. Fit black connectors to the outer
titanium rods. Fit the white connector the
middle titanium
connectors are tight when inserted.
Important: The Cell has to be
connected as shown.
Note: The Cell is supplied with a paddle type flow switch, which is to be installed
on the Cell as shown in the diagram on page 6 and 7.
IMPORTANT: The flow switch must be mounted with the highlighted arrow
on top of the switch pointing in the direction of flow.
CONNECTING THE FLOW SWITCH TO THE POWER SUPPLY
Join the connector on the flow switch and the connector on the cell cable together. They
will clip together.
Note: The bolt included, the saddle clamp, is for a connection to an independent earth.
IMPORTANT: Do not operate the unit with pool isolation valves closed as possible
pressure build-up may cause the cell the break open. Such damage will not be
covered under warranty. For valve use, refer to your pool installer/builder.
Page 6 of 18
fitted to the
rod. Ensure the
P/N 403185