Tabla de contenido
Troubleshooting
Condition
The needle thread breaks.
The bobbin threa breaks.
The needle breaks.
The needle thread loops.
Skipped stitches.
Seam puckering.
The cloth is not fed
smoothly.
The machine does not work. 1. The machine is not plugged in.
Patterns are distorted.
The buttonhole is not sewn
well.
Noisy operation.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set properly
under (drawn to the rear of) the presser foot when sewing is
starting.
6. The fabric is not drawn to the rear when sewing is finished.
7. The thread is too heavy or too fine for the needle.
1. The bobbin thread is not threaded properly in the bobbin
holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and doesn't turn smoothly.
4. The thread is wound loosely on the bobbin.
1. Needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is too loose.
4. A proper foot is not used.
5. The fabric is not drawn to the rear when sewing is finished.
6. The needle is too fine for the fabric being sewn.
1. The needle thread tension is too loose.
2. The needle size is not suitable for the thread.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or thread are not suitable for the fabric being
sewn.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
* Use a stabilizer for very fine fabrics.
1. The feed dog is packed with lint.
2. The stitches are too fine.
2. Thread is caught in the hook race.
3. The bobbin winder spindle is still in the winding position.
1. The stitch is not balanced.
1. The stitch density is not suitable for the fabric being sewn.
2. Interfacing is not being used with stretch fabrics.
1. The feed dog is packed with lint.
2. Lint has collected in the bobbin holder.
Cause
67
Reference
Page 22
Page 12
Page 14
Page 14
Page 28
Page 28
Page 14
Page 20
Page 62
Replace the bobbin.
Re-wind the bobbin.
Page 14
Page 14
Page 14
Use proper foot.
Page 28
Page 14
Page 12
Page 14
Page 14
Page 14
Page 14
Page 22
Replace the needle.
Page 12
Page 22
Page 14
Make stitch shorter.
Page 62
Make stitch longer.
Page 6
Page 62
Page 18
Page 60
Page 44
Page 40
Page 62
Page 62
Tabla de contenido
Solución de problemas
