Tabla de contenido
q
z
w
q
e
c
x
v
w
e
w
q
r
y
t
u
Blind Hemming
Machine settings
q Pattern
w Presser foot
e Thread tension : 3 - 6
Use pattern #09 for woven fabrics while #08 for knits and
stretch fabrics.
z On heavy weight fabrics that ravel, the raw edge
should be overcast first.
Fold the hem under the fabric as illustrated for fine or
medium fabrics.
Fold a hem with the wrong side up forming a 0.5 cm
allowance.
q Wrong side of the fabric
w 0.5 cm
e Heavy weight fabric
r Fine and medium weight fabric
x Place the fabric so that the needle just pierces the
folded edge when the needle comes over the extreme
left side.
Lower the presser foot.
Adjust the needle drop position with the stitch width
adjusting button if necessary.
c Sew slowly while guiding the folded edge along the
left side of the clear window of the foot.
t Folded edge
y Clear window of the foot
v Open and press the fabric after sewing is finished.
u Right side of the fabric
NOTE:
If the needle drops too far left, the stitches will be
apparent on the right side of the fabric.
Adjusting the needle drop position
Press
(left) or
the cursor under the stitch width.
Press
(up) mark on the ring button to move the needle
drop position to the left.
Press
(down) mark on the ring button to move the
needle drop position to the right.
NOTE:
The stitch width will not change but the needle drop
position will change.
50
: #08 or #09
: Zigzag foot A
(right) mark on the ring button to shift
Tabla de contenido
Solución de problemas
