Tabla de contenido
q
e
w
r
48
Button Sewing
Machine settings
q Pattern
: #02
w Presser foot
: Satin stitch foot F
e Thread tension : 3 - 7
r Feed dog
: Lowered
Lower the feed dog.
Align the holes in the button with the horizontal slot of the
foot.
Lower the foot to hold the button in place.
Adjust the stitch width so the needle will enter into the left
hole in the button.
Turn the handwheel several times so that the needle
will enter the right hole in the button. Readjust the stitch
width if necessary.
Sew about 10 stitches at a slow speed.
Raise the presser foot and remove the fabric.
Cut both needle and bobbin threads leaving 10 cm tails.
Pull the bobbin threads to bring the needle threads to the
wrong side of the fabric then knot the threads.
After sewing is finished raise the feed dog for normal
sewing.
Tabla de contenido
Solución de problemas
