Faults Reference Code; Warning Indicator - lapara LA-ON-1K-LCD-V.10 Manual De Usuario

3-7. Faults Reference Code

Fault event
Bus start fail
Bus over
Bus under
Inverter soft start fail
Inverter voltage high
Inverter voltage Low
Inverter output short

3-8. Warning indicator

Warning
Low Battery
Overload
Over input current
Battery is not connected
Over Charge
Site wiring fault
EPO enable
Over temperature
Charger failure
Battery fault
Out of bypass voltage range
Bypass frequency unstable
Battery replacement
EEPROM error
NOTE: "Site Wiring Fault" function can be enabled/disabled via software. Please check
software manual for the details.
LA-ON-1K/2K/3K-LCD/RACK-V.10 (2018)
Fault code Icon Fault event
01 x Battery voltage too high
02 x Battery voltage too low
03 x Charger output short
11 x Over temperature
12 x Overload
13 x Charger failure
14 x Over input current
Icon (flashing)
21
Code Alarm
Sounding every 2 seconds
Sounding every second
Sounding 2 beep every 10 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
(At this time, UPS is off to remind
users something wrong with battery)
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Fault code Icon
27 x
28 x
2A x
41 x
43
45 x
49 x