Walgreens WGNBPA-240BT Manual Del Usuario E Instrucciones De Programación página 19

1. If the cuff is not assembled, pass the end of the cuff furthest away from
the tubing through the metal D-ring in order to form a loop. The smooth
side without the felt material should be on the inside of the cuff loop
2. Plug the cuff tube into the left side of the unit.
Insert Plug Here
3. Open the arm cuff so that your arm may be placed through it.
4. Remove tight-fitting clothing from your upper left arm so that the cuff
can be wrapped around your exposed arm.
NOTE: It is recommended to wrap the cuff on a bare arm or over thin
clothing to ensure accuracy. Thick clothing or a rolled up sleeve will
cause inaccurate blood pressure measurements.
End of Cuff
D-ring
18