Basic Operation - Sharp Eco inverter AY-XPM7RR Manual De Instrucciones

BASIC OPERATION

NOTE:
TIPS ABOUT AUTO MODE
• In the AUTO mode, the unit will automatically select COOL or HEAT mode by comparing the room
temperature and your desired temperature.
• The unit will automatically switch between HEAT and COOL mode to keep the desired temperature.
• COANDA button and SPOT AIR button will be inactivated during AUTO mode.
1
Press the COOL, HEAT, AUTO or DRY
button.
• The green OPERATION lamp (
TO TURN OFF
Press the STOP button.
• The green OPERATION lamp (
2
Press the TEMPERATURE button to set
the desired temperature.
(COOL/HEAT/AUTO mode)
The temperature setting range:
16-30°C.
(DRY mode)
The temperature can be changed up to ±2 °C the
automatically set of temperature.
TURN OFF
(Example: 1°C higher)
1
2
(Example: 2°C lower)
3
3
Press the FAN button to set the desired
fan speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
GB-6
: COOL : HEAT
: AUTO : DRY
AUTO SOFT LOW
) will light up.
) will turn off.
HIGH