Turn On The Device; Set Clock - Nyne NH-6500 Manual Del Usuario

Turn on the device

1
Turn the
on the back of the device to the
position.
☞
You can hear a beep from the
device.
☞
The LED screen lights up with clock
2
Press
tap .on the top panel).
☞
The touch buttons on the top panel
of the device light up.
☞
The device switches to the
last selected audio source
automatically.
To switch the device to standby mode:
Press on the remote control
panel).

Set clock

1
When the device is turned on,
press on the remote control
on the top panel)
repeatedly to access clock setting.
☞
"TIME" is displayed on the LED
screen.
2
Press on the remote control
☞
3
Press
on the top panel) repeatedly to
adjust the hour, and then press
☞
NYNE NH-6500_User Manual_A5.indb 17
4
switch
.on the top
) on the
Press ) on the
on the top panel) repeatedly to
adjust the minute, and then press
Tips:
The device only supports the
24-hour clock system.
During clock setting, if there is no
operation within six seconds, the
current settings will be cancelled.
EN 17
5/19/2012 6:13:26 PM