Preparation; Unpack; Mount The Base Stand - Nyne NH-6500 Manual Del Usuario

3 Preparation

Unpack

Unpack and identify the items of your
package.
1 x multifunction Bluetooth docking
speaker
1 x remote control
2 x AAA batteries
1 x power cord
1 x RCA-to-3.5mm audio cable
1 x base stand mounting kit
1 x User Manual
1 x Quick User Guide
1 x warranty card

Mount the base stand

Warning:
Take care when handling the
device to avoid any damage to
the device and human bodies.
Before mounting, make sure that
you have checked items in the
supplied base stand mounting kit
and prepared appropriate cross
screws.
To ensure reliable support of the
device, make sure that all screws
are secure, but not over-tightened.
14 EN
NYNE NH-6500_User Manual_A5.indb 14
1
Lay down the device as shown on
2
Align the smaller wooden board
recessed screw holes) with the four
holes in one end of the pillar stand.
3
Insert four cross tapping screws
recessed screw holes in the smaller
wooden board, and then tighten
them with an appropriate cross
screwdriver.
4
Align the larger wooden board
recessed screw holes) with the four
holes in the other end of the pillar
stand.
5/19/2012 6:13:25 PM