Installing Remote Control Batteries; Setup Menu - OK. OPD 250 Manual De Instrucciones

EN EN
BEFORE FIRST TIME USE
• Remove the product and accessories carefully from the original packaging. It is recommended to keep
the original packaging for storage. If you wish to dispose of the original packaging, please observe
applicable legal provisions. Should you have any questions regarding proper disposal, contact your
local waste management center.
• Inspect the delivery contents for completeness and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet immediately.
• After unpacking, please refer to chapter Cleaning and care.
OPERATION

Installing remote control batteries

1 Open the battery cover on the back of the remote control. Insert 2 batteries (AAA, 1.5 V). Ensure the
+ and − polarities of the batteries line up with the markings inside the case. Close the cover.
Connecting to TV
Caution: Disconnect the AC power cord before connecting any devices.
2 2 Connect the DVD player to the TV with an HDMI, Video or SCART cable. Connect the DVD player to the TV with an HDMI, Video or S-Video cable.
Audio Connecting to digital amplifi er
3 3 Connect the DVD player's FR and FL jack to the audio input jack on the digital amplifi er. Alternative Connect the DVD player's R and L jack to the audio input jack on the TV.
you can connect the DVD-Player via an OPTICAL cable. Note: Only necessary when connected via Video cable.
Plugging in the power cord
Connect the power plug to a suitable power outlet.
4
OSD

SETUP MENU

Press the SETUP button on the remote control. SETUP MENU will be displayed. After accessing
5
the SETUP MENU, press
confi rm. Press
again. In the SETUP MENU, you may choose any of the following options as you like.
• TV Display
Select TV Display in the SETUP MENU and confi rm with ENTER button. Press
desired format, then press the ENTER button to confi rm.
Note: The image display ratio is related to the recorded disc format. Some disc cannot display images
in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars
will appear on the left and right side of the screen. You must adjust the screen setting depending on
the type of the television you have.
• Angle Mark
Select Angle Mark in the SETUP MENU and confi rm with ENTER button. Press
on or off the angle. Press the ENTER button to confi rm.
IM_OPD250_171227_V03_HR.indb 26
button to select an item desired, then press the ENTER button to
or
button return to the next upper menu. To exit the setup, press the SETUP button
26 26
or button to select a
or button to switch
27/12/17 2:26 pm