Gima ECG90A Manual De Uso página 60

1 Click or press [UP] [DOWN] to turn page up and down.
2 Click
the main menu, click
3 BackLight: select "OFF" and confirm it, the back light will close and device
will enter the power-save mode. Then press any a key on the panel to open
the back light.
4 Power alarm: when it is enabled, system can alarm every 10s when
the charge of battery is less than 5% without AC power source.
5 Key voice: when it is enabled, key can make sound after device is started.
Otherwise it is the silence mode.
6 Language: can select Chinese or English.
7 Info input: when it is enabled, you have to enter the interface "Set Patient"
as Fig.13-3-4 before print or save.
Keyboard
1) Switch setting information by [UP] [DOWN] on the panel.
2) Select the item you want to set, then touch the keyboard on the screen
or press [Confirm] on the panel and move focus to the keyboard to set
current information. Click
to confirm your setting.
3) Click
without save.
Attention:
a) you can click directly or press [LEFT] [RIGHT] to set sex without keyboard.
b) the length of name is no more than 3.
c) age <200.
d) weight(kg)<200
8 USB-mode
1) This item is disabled when USB is not connected as Fig.13-3-2.
ENGLISH
to save the current settings and exit this interface into
to save the setting and print. Click
to exit without save.
to delete the input. Click
Fig. 13-3-4
to print
60