49
Chapter 6
NOTES BEFORE OPERATING
6.1 Read the user manual carefully before operation to ensure safe
and effective use.
6.2 Notes for installation and storage:
• Keep the device away from high voltage cable, X-ray equipment,
ultrasound device or electrotherapeutics machine, etc.
• Avoid using and storing the device in the places with high air pressure,
temperature and humidity beyond common standard, bad ventilation,
excessive dust or salt-alkali gas and chemical medicine.
6.3 The device should be put on flat place and taken and put lightly when
moved. Avoid too strong vibration and shock.
6.4 Both AC frequency and voltage value should be in accordance with the
requirements and ensure enough current capacity.
6.5 Please place the device indoor where is easy to be grounded. Do not
contact the patient and his connected cables with other conductors,
including ground or the bed conducted well with ground.
6.6 Clean lead cable with soap and rinsing, sterilize it with alcohol group or
aldehyde group.
6.7 Please ensure to run the equipment in the normal temperature, viz.
+5°C~+35°C. If the equipment is stored in the higher or lower
temperature, please put it in the running environment for 10 min without
run, in order to ensure the equipment works normally.
Function key: Power on/Power off/
Lead number switch/Confirm
Direction key: up
Direction key: down
Direction key: left
Direction key: right
ENGLISH