Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING:
During normal operation, the surfaces of the unit become very hot. It is VERY
IMPORTANT that the power cords and gas supply hoses DO NOT TOUCH OR REST
ON ANY surface of the unit or to come within 12" of the heater.
The area directly above the unit becomes hot during normal operation of the
heater. DO NOT install electrical wiring, water lines or conduit above the heater.
DO NOT run gas supply hoses above the heater.
DO NOT ALLOW ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO
INSTALL, ASSEMBLE, LIGHT, ADJUST OR OPERATE THIS HEATER.
THIS HEATER IS TO BE INSTALLED BY CERTIFIED INSTALLERS ONLY.
ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THESE
INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER.
HEATER IS SHIPPED PRE-ASSEMBLED
TOOLS REQUIRED FOR INSTALLING HEATER:
¾" wrench for tightening gas connections
11/16" wrench
2 pipe wrenches
¼" nut driver
For additional manuals or more information, see our website at
QuadRadiant®
LOW PRESSURE 80,000 BTU Heater
Direct Spark Ignition
LP Gas 10" WC at outlet of control (10¼" Max.)
Natural Gas 5½" WC at outlet of control (5¾" Max.)
CAUTION
! WARNING!
Failure to read and
understand operator's
manual and all safety signs
could result in serious injury.
Manual must remain with
equipment.
www.ctbinc.com
4
Tabla de contenido
