11.8 Sandals
To position the user's feet in the sandals
secure the Velcro straps provided so the foot
is held in place. the straps should be placed
over the bridge of the foot and over the
toes. The front strap can be fed through one
of two slots on either side of the sandals,
depending on the size of the user's feet (2).
If the child is wearing sandals or light
footwear check the straps to make sure
the webbing does not irritate the skin.
1
2
11.9 Tray adjustment
The activity tray can be used for a range of
functions and its position can be fine tuned
to suit the user and the activity whether it
is for fun, education or feeding. The tray is
attached to the seat by inserting the tubes
into the receiving brackets. Once the tray is
located in position the knob (A) should be
tightened securely.
To height adjust the tray loosen knob (B), set
to the required position and then retighten
securely. To angle adjust the tray, loosen
knob (C), set to the required angle and then
retighten securely.
Do not adjust the horizontal bars beyond
the moulding, except when you are
removing the tray.
C
A
B
Always use caution to ensure the child's
hands or arms do not become trapped
when inserting the tray.
Never use the tray to steer or push
the chair.
Always use caution to ensure fingers
do not become trapped in the slot when
height adjusting the tray.
Do not place hot objects, greater than 40
degrees Celsius, on the tray.
Please note that the tray is for the use
of the user only. Do not lean or place
heavy objects on the tray greater
than 8kgs (17.6lbs).