Setting The Clock - Teac CR-H500 Manual Del Usuario

The clock setting of this unit is automatically adjusted
according to the CLO CK T IME data of an RDS
broadcasting.
If you adjust the clock manually, follow the following
steps.
Press the TIME SET button.
1
Each time the TIME SET button is pressed, the mode is
changed as follows.
< When no action is taken for 1 minute, the time adjust
mode will be cancelled.
< Press the stop button (H) to cancel the time setting.
Press the scroll buttons (˙/¥) to set the current
2
hour.
36

Setting the Clock

Current Time
On Time
Off Time
Source select
3 Press the ENTER button.
The "minute" value blinks.
4 Press the scroll buttons (˙/¥) to set the current
minute.
Press the ENTER button.
5
The clock starts from 00 seconds.
< The clock setting will not be saved when the AC
power cord is pulled out.