4.2.6 Displaying a message in a mirror-inverted way
Press the key MIRROR (19) to display the current message in
a mirror-inverted way or – if no message is displayed while the
key is pressed – to display the next message displayed in a
mirror-inverted way. To cancel this mode, press the key MIR-
ROR once again.
4.3 Adjusting the speed and the brightness of the dis-
play
1) Adjust the display speed of the messages with the key
SPEED (18) and the keys UP and DOWN (10): To increase
the speed, first press the key SPEED, then the key UP. To
reduce the speed, first press the key SPEED, then the key
DOWN.
Repeat the corresponding key combination so many
times until the desired speed has been reached.
2) Adjust the brightness of the display with the key LIGHT (9)
and the keys UP and DOWN (10): To increase the brightness,
first press the key LIGHT, then the key UP. To reduce the
brightness, first press the key LIGHT, then the key DOWN.
Repeat the corresponding key combination so many
times until the desired brightness has been reached.
All rights reserved by MONACOR
or by any means for any commercial use.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be reproduced in any form
4.4 Indicating LED on the rear side of the unit
The LED (3) on the rear side of the unit serves as an indicator
if the unit is placed in such a way that the display (1) is not
visible for the operator.
Each time a key is pressed on the remote control, the LED
will shortly flash. If a message is displayed, the LED will flash
rapidly, at the end of a message it will light up for a longer time.
5 Specifications
Power supply
message light: . . . . . . 12 V /650 mA via supplied power
remote control: . . . . . . via two 1.5 V batteries of size AAA
Ambient temperature: . . . 0 – 40 °C
Dimensions, weight: . . . . 440 x 100 x 70 mm, 700 g
According to the manufacturer.
Subject to technical modification.
supply unit connected to
230 V~/50 Hz
GB
17