Kompernaß Silver Crest KH 6500 Instrucciones De Uso página 105

No image or Black/White image only
A Check to make sure that all connection cables
between the DVD player and the television
(or Video projector) are firmly inserted into
the corresponding sockets
B Check to make sure that the settings in the
OSD menu match the connections variant, with
which you have connected the DVD player to
the television (or Video projector).
C Check by means of the televisions (or Video
projectors) operating instructions to see if set-
tings to the television (or Video projector) may
be necessary in order to use the DVD player
with the television.
No sound
A Check to see if the DVD player is possibly
switched to mute (MUTE button).
B Check to see that all connecting cables bet-
ween the DVD player and potentially connec-
ted audio components are firmly plugged into
the corres-ponding sockets
C Check to make sure that the settings in the
OSD menu match the connections variant, with
which you have connected the audio compo-
nent to the DVD player.
D Check by means of the televisions operating in-
structions to see if settings to the television may
be necessary in order to use the DVD player
with the television.
E Check by means of the operating instructions
for a potential connected audio component if
settings to it are necessary in order to use it
with the DVD player.
No 4:3 or 16:9 image
A Check by means of the televisions operating in-
structions, which image formats the television
has at its disposal.
B Check to see if the settings in the OSD menu
match the available image format of the tele-
vision.
Remote control not functioning
A Check to make sure that the remote control
batteries have been inserted into the battery
compartment with the correct polarity.
B Check to see if the remote control batteries
are exhausted and, if necessary, change both
batteries.
C Make sure that there are no obstacles located
between the remote control and the DVD player.
D Be situated no more than five meters from the
DVD player when using the remote control.
Playback language/ Subtitle language do
not correspond to the settings in the OSD
menu
The playback language/Subtitle language setting in
the OSD menu is not available on the inserted disc.
One or several functions can not be switched
on
The selected function may not be available on all
DVDs/VCDs/S-VCDs! If you attempt to carry out a
function that is not available the symbol
displayed on the television screen.
None of the buttons on the appliance or on
the remote control are functioning/other
malfunctions
A Switch off the DVD player by pressing the
POWER button. Wait ten seconds, then press
the "Power" button again once to switch the
DVD player back on.
B If the malfunction is still present: Reset the
DVD player to its default settings.
Contact one of our service partners in your
area if ...
• the stated function defect can not be resolved
as described or
• other functional defects arise.
For this see chapter 18. "Warranty & Service".
- 103 -
will be