Remote Control Features And Settings - Haier Tempo Serie Manual Del Usuario

REMOTE CONTROL FEATURES AND SETTINGS

Remote Control
7
8
2
3
10
9
16
12
17
13
1. Power Button
Press the ON/OFF button on the remote control to start or
stop the unit.
2. COOL Button
In COOL mode, the unit operates in cooling. When FAN is set
to AUTO, the heat pump automatically adjusts the fan speed
according to the room temperature. The
during COOL mode.
3. HEAT Button
In HEAT mode, warm air will blow out after a short period of
the time due to cold-air prevention function. When FAN is set
to AUTO, the heat pump automatically adjusts the fan speed
according to room temperature. The
during HEAT mode.
49-5000094
4. Temperature +/- Buttons
Temp + : Every time the button is pressed, the temperature
setting increases. Temp - : Every time the button is pressed,
temperature setting decreases. The operating temperature
range is 60°F-86°F (16°C-30°C).
5. FAN SPEED Button
FAN SPEED: For each press the fan speed changes as follows:
Remote control:
6. DRY Button
1
DRY mode is used to reduce humidity. In DRY mode, when
room temperature becomes lower than temp. setting +2°F,
unit will run intermittently at LOW speed regardless of FAN
6
setting. The
4
7. FAN MODE Button
FAN mode circulates air only; there is no temperature
adjustment available. Use the fan speed button (5) to adjust
11
fan speed from low, medium to high. Auto, Turbo and Quiet
are not available.
5
8. TURBO Button
The TURBO function is used for fastest air flow in Heating
or Cooling modes. Control will display the TURBO icon [UP
14
ARROW] on the bottom right side of the remote display.
Pressing the TURBO button again or the FAN SPEED button
15
will turn TURBO off.
9. Quiet Button
19
The QUIET function switches the fan to the lowest speed.
The control will display the QUIET icon [DOWN ARROW]
18
on the bottom left side of the remote display. Pressing the
QUIET button again or the FAN SPEED button will turn QUIET
off.
10. Louver UP/DOWN Button
Press the LOUVER UP/DOWN button to choose the position
of the horizontal airflow louvers.
Status display of air flow
COOL/DRY:
HEAT:
will be displayed
NOTE:
• It is advisable not to keep the vertical louver in the downward
position for an extended period of time in COOL or DRY mode,
otherwise condensate water may form on the louver.
• When turning the unit on, the remote control will
automatically return the louver to the previous set swing
will be displayed position. When turning the unit off, the louver will rotate to
the full open position prior to closing.
will be displayed during DRY mode.
5