Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Contents
1
2
Important Notes . . . . . . . . . . . . . . . . . . . . 11
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Conformity and approval . . . . . . . . . . . . . . 11
4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Inserting / Replacing the batteries . . . . . . . . 11
and fastening the transmitter . . . . . . . . . . . 11
4.3 Switching on/off the transmitter . . . . . . . . . 12
4.4 Settings via the menu . . . . . . . . . . . . . . . . 12
4.5 Basic settings . . . . . . . . . . . . . . . . . . . . . . 12
4.6 Setting the transmission frequency . . . . . . 13
4.6.2 Setting the frequency manually . . . . . . . 14
4.6.3 Selecting a frequency from a group . . . . 14
4.7 Adjusting the input sensitivity . . . . . . . . . . 14
4.8 Muting the microphone . . . . . . . . . . . . . . . 14
4.9 Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5
Specifications . . . . . . . . . . . . . . . . . . . . . 15
Transmission frequencies . . . . . . . . . . . . . 28
10
®
function . . . . . . . . . . . . . . . 13
All operating elements and connections de -
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 Transmitting antenna
2 Battery status LED; shows red when the batter-
ies are discharged
shows red in case of overload at the input of the
transmitter
keeps flashing in yellow to indicate that the
microphone connected has been muted with
the button
(4)
4 Button
to switch on / off and to mute the micro-
phone and to exit a menu
To switch on or to exit a menu,
press the button briefly.
To mute / unmute,
press the button briefly; when the microphone
is muted, the LED MUTE (3) keeps flashing
To switch off,
keep the button pressed for 2 seconds until
the display shows
5 Latch for the battery compartment (6)
6 Battery compartment cover
7 LED REMOSET: lights up for 5 seconds to indi-
cate that the REMOSET function has set the
pocket transmitter to the transmission fre-
quency of the receiver (
8 Microphone connection (4-pole mini XLR jack)
9 Buttons ▼ and ▲ to select a menu item and to
change settings
10 Button SET to call up the setup menu shown in
fig. 2 (keep the button pressed for 2 seconds until
the menu appears on the display), to call up a
menu item and to save a setting (
11 Display, showing:
the name of the unit, any name may be selected
(10 characters)
G = the group number (1 ... 12)
C = the channel number (1 ... 60)
MHz = the transmission frequency
(624.000 ... 694.000 MHz)
. . dB = the microphone sensitivity adjusted
(-18 dB ... 12 dB)
= the battery status
Power OFF
.
chapter 4.6.1)
chapter 4.4)
Capítulos
Tabla de contenido
